mathfacts-in-a-flash-uk

How to Connect a Renaissance Receiver to Your Computer

For more information about using Renaissance Receivers with MathsFacts in a Flash, refer to the 2Know! Classroom Response System Setup and Resource Guide.

To find this document, on the Home page, select MathsFacts in a Flash, and then select Resources. Select About the Software. Then, select the name of the document.

You need a Renaissance Receiver to transfer data between NEO 2s and/or Renaissance Responders with MathsFacts in a Flash RP.

To connect a Renaissance Receiver to your computer:

  1. Make sure you install NEO Manager (see the NEO Manager User Manual for instructions) before connecting the Renaissance Receiver.
  2. If this is the first time you have connected the Receiver to your computer, make sure you are logged in to your computer as an administrator or that you have permissions that allow the device drivers to load properly.

  3. Find the Renaissance Receiver and the USB data cable.
  4. Plug the end of the data cable that is nearly square into the connector on the back of the Receiver.
  5. Connect the USB connector on the data cable to an open USB port on your computer.