Responder Settings
To change Responder settings:
-
Press On/Off to turn on the Responder.
-
Highlight Settings in the main menu and press Select.
-
Use the arrow buttons to highlight the setting you want to change. Press Select.
-
See the information for the setting you chose in the table below. Press Select after changing a setting.
For more information, refer to the 2Know! Classroom Response System Setup and Resource Guide.
To view this document, go to the Home page. Select Manuals (in the upper right-hand corner).
Under MathsFacts in a Flash, select the name of the document.
Setting |
Description |
About |
Shows you the firmware version and connected Receiver name. Use the arrows to scroll up and down. |
Contrast |
Lets you increase or decrease screen contrast using the arrow buttons. |
Search for Networks |
Searches for the Receivers in range and lets you select one to connect to. |
Change Font Size |
Allows you to choose whether to use the default small font or a large font. Select the font size and press Select; then, press yes (True) to confirm that you want to keep the new font size. |
Student Information |
Enter the student name or ID that you want to include when you print the MathsFacts in a Flash practice/test history. (If the Responder is owned, the owner's name will be shown, and you cannot change the student information.) |
Assign Owner, Reset Owner and Change Ownership PIN |
Lets you assign a student owner, change the owner and change the owner's personal identification number (PIN). For more information, see the 2Know! Classroom Response System Setup and Resource Guide. |
Security |
Lets you enter the encryption key if it is required for communication with the Receiver. Contact Renaissance Learning for more information. |
Firmware Update |
Lets you update Responders to a newer version. For more information, refer to the 2Know! Classroom Response System Setup and Resource Guide. |